Sizing a dining table: a simple guide for every room

A dining table that's too big makes a room feel cramped. One that's too small leaves everyone bumping elbows. The good news is that getting it right comes down to a few simple measurements. Grab a tape measure and let's work it out.

Step 1: Measure the room, then allow clearance

The most important number isn't the size of the table. It's the space around it. People need room to pull out a chair, sit down and walk behind someone who's seated.

  • Ideal: about 90 to 100 cm from the table edge to the nearest wall or furniture on each side where people sit.
  • Minimum: about 75 cm, enough to pull out a chair and sit, but tight for walking behind.
  • Walkway behind seated diners: allow 100 cm or more if it's a main path through the room.

To find your maximum table size, subtract twice your clearance from each room dimension. For example, a 3.6 m by 3.0 m dining area with 90 cm clearance on all sides leaves room for a table up to about 180 cm by 120 cm.

Step 2: Work out how many people you need to seat

Allow about 60 cm of table edge per person for comfortable elbow room, and 70 cm or more if you have wide chairs with arms. Here's a rough guide for rectangular and oval tables:

  • 4 people: 120 to 150 cm long
  • 6 people: 160 to 180 cm long
  • 8 people: 200 to 240 cm long
  • 10 people: 260 to 300 cm long

Width matters too. Around 90 to 100 cm wide gives space for place settings plus serving dishes down the middle. Narrower than 80 cm can feel tight once the food arrives.

Step 3: Round, oval or rectangular?

Round tables

Round tables are sociable, with no head of the table and everyone in easy conversation. They suit square rooms, smaller spaces and breakfast nooks, and they have no corners to bump into.

  • 90 to 110 cm diameter: seats 4
  • 120 to 130 cm: seats 4 to 6
  • 150 cm: seats 6 to 7
  • 180 cm: seats 8, though the centre becomes hard to reach

Oval tables

An oval gives you the seating of a rectangle with the softer flow of a round. The curved ends make it easier to walk around in a narrow room, and you can often squeeze in an extra chair at each end.

Rectangular tables

The most efficient shape for long, narrow rooms and for seating larger groups. Great for open-plan spaces where the table helps define the dining zone.

Step 4: Check legs and bases

The base affects seating as much as the top. A pedestal base, common on round marble tables, lets you tuck chairs in all the way around. Legs at the corners of a rectangular table can limit seating at the ends. A trestle or offset base leaves more knee room along the sides.

Step 5: Don't forget height

  • Standard dining tables are about 74 to 76 cm high.
  • Allow roughly 25 to 30 cm between the seat of your chair and the underside of the table top for leg room.
  • If you hang a pendant light, about 75 to 85 cm above the table top is a common starting point.

A quick test before you buy

Mark the table's outline on the floor with masking tape, or lay out flattened cardboard boxes. Set chairs around it and walk through the room as you normally would. It's the easiest way to feel whether the size is right.

A note on marble tables

Stone tables are heavy, so it pays to get the size right the first time. Check that your doorways, stairs and lifts can take the top before you order, and tell us about any tight spots. Our white-glove team will deliver and place it for you.

Need a size that isn't listed? Many of our tables can be made to custom dimensions [CONFIRM]. Send us your room measurements or book a showroom visit and we'll help you choose.

Journal

More from the journal

All articles