Marble Care

Marble and travertine are natural stones. They're porous to some degree, and most of them react to acids. None of that should worry you. A few easy habits keep your piece looking beautiful for decades, and the faint marks it gathers along the way become part of its character. This guide covers everything, from sealing to what to do if something goes wrong.

What sealing does (and doesn't do)

A penetrating (impregnating) sealer soaks into the stone rather than sitting on top. It slows liquids from soaking in, which buys you time to wipe up a spill.

Be clear on its limits:

  • It doesn't make stone stain-proof. A spill left long enough can still mark it.
  • It doesn't stop acid etching at all. Etching is a reaction with the stone itself (see below).
  • It wears over time with use and cleaning, so it needs topping up.

We seal every piece before it leaves us [CONFIRM], using a penetrating stone sealer [CONFIRM: product type].

When to reseal

As a guide:

  • Dining tables and kitchen pieces: about every 6 to 12 months.
  • Coffee and side tables: about once a year, or when the water test says so.
  • Decorative pieces: less often.
  • Porous stones like travertine, or surfaces that see heavy use: sooner.

The water test: leave a few drops of water on the surface for 10 to 15 minutes, then wipe them away. If the stone has darkened underneath, it's time to reseal. If it hasn't changed, your sealer is still working.

How to reseal

It takes about half an hour, plus curing time:

  • Clean the surface and let it dry completely, ideally overnight.
  • Use a pH-neutral penetrating stone sealer and follow the maker's instructions.
  • Test it first on a small, hidden area.
  • Apply evenly, then wipe off any excess before it dries, or it can leave a haze.
  • Let it cure fully before using the piece. The label will say how long.

Not sure which sealer to buy? Ask us and we'll recommend one [CONFIRM].

Etching or staining?

They look similar at first, but they're different problems.

Etching is a dull or lighter mark where an acid has reacted with the calcite in the stone. Citrus, wine, vinegar, tomato, soft drinks and some cleaners are the usual causes. It's a change to the surface itself, not something sitting on it, so sealing can't prevent it. You can sometimes feel it with a fingertip.

Staining is colour that has soaked into the stone, such as oil, coffee or red wine. It usually shows as a darker patch. Sealing slows staining down a great deal.

Verde Alpi and Rosso Levanto are serpentine stones, so they're far less sensitive to acids than calcite marbles. Their pale or white veins can still etch.

Everyday care

Good habits that make the biggest difference:

  • Use coasters, placemats and trays.
  • Blot spills straight away rather than wiping, which spreads them.
  • Clean with a soft cloth, warm water and a pH-neutral stone cleaner.
  • Dry the surface after wiping to avoid water marks.
  • Put trivets under hot dishes and pans.
  • Add felt pads under vases, lamps and decor.

What to avoid

These cause most of the damage we see:

  • Acidic or alkaline cleaners: vinegar, lemon, bleach, ammonia and bathroom or kitchen sprays.
  • Abrasive pads, scourers, steel wool and cleaning powders.
  • Leaving spills to sit overnight.
  • Hot pans or dishes straight on the stone. Heat can mark it, and sudden heat can crack it.
  • Dragging heavy objects across the surface.
  • Standing or sitting on tables, or leaning heavy weight on edges and overhangs.

Stone by stone

How each of our stones lives day to day:

  • Carrara: etches with acids, but its light, busy surface hides marks well, especially honed. Keep it sealed against oils and coffee.
  • Calacatta Viola: etches with acids, and its bright white ground shows stains. Seal it regularly and wipe spills fast.
  • Nero Marquina: hides stains but shows etch marks, water spots and dust most of all. Wipe and dry it often.
  • Verde Alpi: our most forgiving stone. It's far less acid-sensitive than marble, though it still needs sealing against stains.
  • Rosso Levanto: its colour and pattern hide everyday marks. The white calcite veins can still etch, so seal it and wipe spills promptly.
  • Travertine: porous by nature, so keep it well sealed, including any filled pores [CONFIRM: filled or unfilled], and wipe crumbs and spills promptly.

See The Stone Guide for how the stones compare.

Caring for decor and kitchen pieces

Boards, mortars, coasters and trays:

  • Wash by hand in warm water with a little mild dishwashing liquid, then dry straight away.
  • Never put stone in the dishwasher. The heat and detergents can dull and damage it.
  • Our kitchen pieces are finished with a food-safe sealer [CONFIRM].
  • Expect a mortar and pestle to etch and wear over time. Grinding citrus zest, vinegar or tamarind will mark it; that's normal use.
  • Avoid cutting acidic foods directly on a marble board if you want to keep it pristine.
  • Vases: tip out water and dry them inside between uses. Use a liner if one is supplied [CONFIRM].

Indoor use

Our pieces are designed for indoor use. Sun, rain and frost will weather and stain stone over time, and damage from outdoor use isn't covered by our Warranty.

If something happens

Don't panic. Most marks can be improved:

  • An etch: on honed stone, light etches often blend in over time. On polished stone they show more. Deeper or widespread etching can be re-honed or re-polished by a stone restoration professional.
  • A stain: act early. Many stains can be drawn out with a poultice, a paste that pulls the stain back out of the stone as it dries. Oil-based and water-based stains need different poultices, so check the product or ask a professional.
  • A chip: keep any broken piece. Small chips can often be filled and blended by a stone repairer.
  • Never: scrub with abrasives, steel wool or harsh chemicals. They'll make a mark worse.

Surface marks like these come from everyday use and aren't covered by our structural warranty. Your rights under the Australian Consumer Law are unaffected. If you think a mark or crack is a fault, or anything feels loose or unstable, stop using the piece and contact us with photos. We'll take a look and point you in the right direction.